Notecarriers are companion development boards designed to make it easy to prototype and deploy IoT solutions with Notecard.
Notecarrier CX is a Notecarrier with a pre-soldered and wired STM32L433 MCU (the same part used in Cygnet) along with an onboard JTAG debug jack, RST and BOOT buttons for bootloader access. Notecarrier CX also provides built-in support for Notecard-based Outboard Firmware Update.
Included is a flexible Molex 209142 antenna for use with either LTE or GPS. If you require a dual LTE/GPS antenna, we recommend adding on the flexible LTE+GPS antenna (or you may choose to use your own preferred antenna). Loose header pins are also included.
Notecarriers require a Notecard to function. Notecarrier CX is compatible with Notecard Cellular, Notecard Cell+WiFi, Notecard for Skylo, Notecard WiFi, and Notecard for LoRa.
Key Specs
-
Onboard STM32L433CCU6 Host MCU (80 MHz Clock, 256 KB Flash, 64KB of SRAM)
-
Onboard RST and BOOT buttons for onboard MCU ROM bootloader access and power reset
-
Built-in support for Notecard-based Outboard Firmware Update
-
Notecard M.2 Key E connector socket and mounting screw standoff
-
USB-C port to power Notecarrier and provide a USB Serial command interface to Notecard
-
DIP switch for toggling USB-C access to Notecard or Onboard STM32 Host
-
Castellated Edges for ease of pick-and-place installation in an end product
-
External Nano-SIM slot for use of an optional secondary SIM
-
2-pin JST PH connector for LiPo battery power and charging support
-
1 Qwiic/StemmaQT I2C port for attaching external peripherals
-
JTAG (SWD capable) debug jack
Reviews
There are no reviews yet.